CONNECT TECH, INC. INTELLICON-NT960 Card Type Serial card Chip Set Intel 80960 RISC Maximum Onboard Memory 2MB SRAM/256KB Dual Ported RAM I/O Options Serial ports (128 on external modules) Data Bus 16-bit ISA [Image] CONNECTIONS Function Label 37-pin serial port connector CN1 USER CONFIGURABLE SETTINGS Setting Label Position » 8-bit data transfer mode enabled J12 Open 16-bit data transfer mode enabled J12 Closed » Factory configured - do not alter SW2/6 On » Factory configured - do not alter SW2/7 On » Factory configured - do not alter SW2/8 On I/O ADDRESS SELECTION Address SW1/1 SW1/2 SW1/3 SW1/4 SW1/5 SW1/6 SW1/7 SW1/8 » 300h On On On On On On Off Off 100h On On On On On On Off On 104h Off On On On On On Off On 108h On Off On On On On Off On 10Ch Off Off On On On On Off On 110h On On Off On On On Off On 3ECh Off Off On Off Off Off Off Off 3F0h On On Off Off Off Off Off Off 3F4h Off On Off Off Off Off Off Off 3F8h On Off Off Off Off Off Off Off 3FCh Off Off Off Off Off Off Off Off Note: A total of 192 base address settings are available. The jumpers are a binary representation of the decimal memory addresses. Switch SW1/8 is the Most Significant Bit and switch SW1/1 is the Least Significant Bit. The switches have the following decimal values: switch SW1/8=512, SW1/7=256, SW1/6=128, SW1/5=64, SW1/4=32, SW1/3=16, SW1/2=8, SW1/1=4. Turn off the switches and add the values of the switches that are off to obtain the correct memory address. (Off=1, On=0) BASE ADDRESS SELECTION Address SW2/1 SW2/2 SW2/3 SW2/4 SW2/5 » D0000h On On On Off On C0000h On On On On On C2000h Off On On On On C4000h On Off On On On C6000h Off Off On On On C8000h On On Off On On F6000h Off Off On Off Off F8000h On On Off Off Off FA000h Off On Off Off Off FC000h On Off Off Off Off FE000h Off Off Off Off Off Note: A total of 32 base address settings are available. The jumpers are a binary representation of the decimal memory addresses. Switch SW1/5 is the Most Significant Bit and switch SW1/1 is the Least Significant Bit. The switches have the following decimal values: switch SW1/5=8192, SW1/4=4096, SW1/3=2048, SW1/2=1024, SW1/1=512. Turn off the switches and add the values of the switches that are off to obtain the correct memory address. (Off=1, On=0) INTERRUPT SELECTION IRQ J1/A J1/B J1/C J1/D J1/E J2/A » 10 Open Open Open Open Closed Open 2/9 Open Open Open Open Open Open 3 Open Open Open Open Open Closed 4 Open Open Open Open Open Open 5 Open Open Open Open Open Open 6 Open Open Open Open Open Open 7 Open Open Open Open Open Open 11 Open Open Open Closed Open Open 12 Open Open Closed Open Open Open 14 Closed Open Open Open Open Open 15 Open Closed Open Open Open Open INTERRUPT SELECTION (CON’T) IRQ J2/B J2/C J2/D J2/E J2/F » 10 Open Open Open Open Open 2/9 Open Open Open Open Closed 3 Open Open Open Open Open 4 Closed Open Open Open Open 5 Open Closed Open Open Open 6 Open Open Closed Open Open 7 Open Open Open Closed Open 11 Open Open Open Open Open 12 Open Open Open Open Open 14 Open Open Open Open Open 15 Open Open Open Open Open SRAM CONFIGURATION Note: The exact configuration of memory is unidentified. DUAL PORTED RAM CONFIGURATION Note: The exact configuration of memory is unidentified.